Esoteric AZ-1 Owner's Manual download pdf (Page 25)

Setting i.LINK, HDMI, etc.

PLAY AREA .//

When playback is stopped, press and hold the PLAY

AREA button for more than 2 seconds.

The unit enters setup mode, and “ >

***

” appears on the

display. (

***

changes depending on your setting.)

In the following cases, the setup mode will be cancelled:

• Leave the unit idle for 10 seconds.

• Press and hold the PLAY AREA button for more than 2

seconds once again.

Repeatedly press the PLAY AREA button to select the

menu item to be changed.

Use the SKIP buttons (.//) to select the options

within the menu item.

Press and hold the PLAY AREA button for more than 2

seconds (or leave the unit idle for 10 seconds) to exit

the setup mode.

< Switching off the power without exiting the setup mode may

cause problems. Do not turn the unit off.

Settings are stored even when power is turned off and the

unit is unplugged. If left unplugged for an extended period,

the settings may be lost.

Available menu item and options

(i.LINK)

Selects signal output type via the i.LINK (AUDIO) terminal.

Choose 60958, PCM or OFF.

The i.LINK button of the remote control unit provides the

same function. See page 26 for details.

HDMI

Selects an HDMI video output format.

Select “Auto” when the unit is connected to a device with

an HDMI terminal. The format recommended by the

receiving side is automatically selected.

The format is automatically set to “720p” when “Auto” is

selected and when the unit is connected to a device using

an HDMI-DVI conversion cable.

The HDMI button of the remote control unit provides the

same function. See page 27 for details.

H_RGB

Selects a video signal output from the HDMI terminal.

Choose either “RGB” or “YC

bCr”.

When units not supporting YCbCr are connected with an

HDMI cable, RGB is automatically output even when YC

bCr

is selected.

“RGB” is selected for connections using an HDMI-DVI

conversion cable.

H_EXP

Selects HDMI level. Choose either “EXPAND” or

“NORMAL”.

The HDMI button of the remote control unit provides the

same function. See pages 27 for details.

H_ASP

Selects an aspect ratio for HDMI output. Choose either

“4:3” or “FULL”.

The HDMI button of the remote control unit provides the

same function. See pages 27 for details.

DF (digital filter)

Selects a digital filter. Choose “Wide” or “Narrow”.

DSD

Select “Normal (factory default)” to output DSD after

processing and “Direct” to output the audio signal without

running it through the processor.

The analog level in the Direct mode is 3 dB lower than in the

Normal mode.

(Normal display)

Exit the setting mode.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 43 44

Comments to this Manuals

No comments

Esoteric AZ-1 Owner's Manual Page 25

Comments to this Manuals

Related products and manuals for CD players Esoteric AZ-1